Benefits

• Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
• The modified truss head design provides a larger load bearing surface for better holding power. Under head serrations lock tight in metal to metal applications.
• Grabber fine thread modified truss head screws begin with the best available materials and conform to strict manufacturing requirements in thread forming.
• The super-sharp Vector™ point starts and drives up to 40% faster than most other fine thread lath and metal framing screws.

Installation Guidelines

• Use a standard screw gun with a depth sensitive nose piece. Suggested screw gun specification for optimal performance – Size #6 - #10, up to 4,000 RPM.
• The Modified Truss Head is fully seated when the bearing surface of the head is flush with the work surface.
• The fastener must penetrate beyond the metal three full thread pitches.
• Overdriving may result in failure of the fastener or stripe out within the substrate.

Recommended Application

Light gauge 18-30 mil (25-20ga) steel framing. K-lath installation.

Special Features

Vector™ Point - Serrations Under Head